I want to get the
stdout in a variable after running the
Lets take this line as an example:
batcmd="dir" result = os.system(batcmd)
result will contain the error code (
0 under Windows or
1 under some linux for the above example).
How can I get the
stdout for the above command without using redirection in the executed command?
If all you need is the
stdout output, then take a look at
import subprocess batcmd="dir" result = subprocess.check_output(batcmd, shell=True)
Because you were using
os.system(), you’d have to set
shell=True to get the same behaviour. You do want to heed the security concerns about passing untrusted arguments to your shell.
If you need to capture
stderr as well, simply add
stderr=subprocess.STDOUT to the call:
result = subprocess.check_output([batcmd], stderr=subprocess.STDOUT)
to redirect the error output to the default output stream.
If you know that the output is text, add
text=True to decode the returned bytes value with the platform default encoding; use
encoding="..." instead if that codec is not correct for the data you receive.
I would like to expand on the Windows solution. Using IDLE with Python 2.7.5, When I run this code from file Expts.py:
import subprocess r = subprocess.check_output('cmd.exe dir',shell=False) print r
…in the Python Shell, I ONLY get the output corresponding to “cmd.exe”; the “dir” part is ignored. HOWEVER, when I add a switch such as /K or /C …
import subprocess r = subprocess.check_output('cmd.exe /K dir',shell=False) print r
…then in the Python Shell, I get all that I expect including the directory listing. Woohoo !
Now, if I try any of those same things in DOS Python command window, without the switch, or with the /K switch, it appears to make the window hang because it is running a subprocess cmd.exe and it awaiting further input – type ‘exit’ then hit [enter] to release. But with the /K switch it works perfectly and returns you to the python prompt. Allrightee then.
Went a step further…I thought this was cool…When I instead do this in Expts.py:
import subprocess r = subprocess.call("cmd.exe dir",shell=False) print r
…a new DOS window pops open and remains there displaying only the results of “cmd.exe” not of “dir”. When I add the /C switch, the DOS window opens and closes very fast before I can see anything (as expected, because /C terminates when done). When I instead add the /K switch, the DOS window pops open and remain, AND I get all the output I expect including the directory listing.
If I try the same thing (subprocess.call instead of subprocess.check_output) from a DOS Python command window; all output is within the same window, there are no popup windows. Without the switch, again the “dir” part is ignored, AND the prompt changes from the python prompt to the DOS prompt (since a cmd.exe subprocess is running in python; again type ‘exit’ and you will revert to the python prompt). Adding the /K switch prints out the directory listing and changes the prompt from python to DOS since /K does not terminate the subprocess. Changing the switch to /C gives us all the output expected AND returns to the python prompt since the subprocess terminates in accordance with /C.
Sorry for the long-winded response, but I am frustrated on this board with the many terse ‘answers’ which at best don’t work (seems because they are not tested – like Eduard F’s response above mine which is missing the switch) or worse, are so terse that they don’t help much at all (e.g., ‘try subprocess instead of os.system’ … yeah, OK, now what ??). In contrast, I have provided solutions which I tested, and showed how there are subtle differences between them. Took a lot of time but…
Hope this helps.
These answers didn’t work for me. I had to use the following:
import subprocess p = subprocess.Popen(["pwd"], stdout=subprocess.PIPE) out = p.stdout.read() print out
Or as a function (using shell=True was required for me on Python 2.6.7 and check_output was not added until 2.7, making it unusable here):
def system_call(command): p = subprocess.Popen([command], stdout=subprocess.PIPE, shell=True) return p.stdout.read()
commands also works.
import commands batcmd = "dir" result = commands.getoutput(batcmd) print result
It works on linux, python 2.7.
I had to use os.system, since subprocess was giving me a memory error for larger tasks. Reference for this problem here. So, in order to get the output of the os.system command I used this workaround:
import os batcmd = 'dir' result_code = os.system(batcmd + ' > output.txt') if os.path.exists('output.txt'): fp = open('output.txt', "r") output = fp.read() fp.close() os.remove('output.txt') print(output)
import subprocess string="echo Hello world" result=subprocess.getoutput(string) print("result::: ",result)