In Python, can I call the main() of an imported module?
Question:
In Python I have a module myModule.py where I define a few functions and a main(), which takes a few command line arguments.
I usually call this main() from a bash script. Now, I would like to put everything into a small package, so I thought that maybe I could turn my simple bash script into a Python script and put it in the package.
So, how do I actually call the main() function of myModule.py from the main() function of MyFormerBashScript.py? Can I even do that? How do I pass any arguments to it?
Answers:
It’s just a function. Import it and call it:
import myModule
myModule.main()
If you need to parse arguments, you have two options:
-
Parse them in main(), but pass in sys.argv as a parameter (all code below in the same module myModule):
def main(args):
# parse arguments using optparse or argparse or what have you
if __name__ == '__main__':
import sys
main(sys.argv[1:])
Now you can import and call myModule.main(['arg1', 'arg2', 'arg3']) from other another module.
-
Have main() accept parameters that are already parsed (again all code in the myModule module):
def main(foo, bar, baz='spam'):
# run with already parsed arguments
if __name__ == '__main__':
import sys
# parse sys.argv[1:] using optparse or argparse or what have you
main(foovalue, barvalue, **dictofoptions)
and import and call myModule.main(foovalue, barvalue, baz='ham') elsewhere and passing in python arguments as needed.
The trick here is to detect when your module is being used as a script; when you run a python file as the main script (python filename.py) no import statement is being used, so python calls that module "__main__". But if that same filename.py code is treated as a module (import filename), then python uses that as the module name instead. In both cases the variable __name__ is set, and testing against that tells you how your code was run.
It depends. If the main code is protected by an if as in:
if __name__ == '__main__':
...main code...
then no, you can’t make Python execute that because you can’t influence the automatic variable __name__.
But when all the code is in a function, then might be able to. Try
import myModule
myModule.main()
This works even when the module protects itself with a __all__.
from myModule import * might not make main visible to you, so you really need to import the module itself.
Assuming you are trying to pass the command line arguments as well.
import sys
import myModule
def main():
# this will just pass all of the system arguments as is
myModule.main(*sys.argv)
# all the argv but the script name
myModule.main(*sys.argv[1:])
I had the same need using argparse too.
The thing is parse_args function of an argparse.ArgumentParser object instance implicitly takes its arguments by default from sys.args. The work around, following Martijn line, consists of making that explicit, so you can change the arguments you pass to parse_args as desire.
def main(args):
# some stuff
parser = argparse.ArgumentParser()
# some other stuff
parsed_args = parser.parse_args(args)
# more stuff with the args
if __name__ == '__main__':
import sys
main(sys.argv[1:])
The key point is passing args to parse_args function.
Later, to use the main, you just do as Martijn tell.
Martijen’s answer makes sense, but it was missing something crucial that may seem obvious to others but was hard for me to figure out.
In the version where you use argparse, you need to have this line in the main body.
args = parser.parse_args(args)
Normally when you are using argparse just in a script you just write
args = parser.parse_args()
and parse_args find the arguments from the command line. But in this case the main function does not have access to the command line arguments, so you have to tell argparse what the arguments are.
Here is an example
import argparse
import sys
def x(x_center, y_center):
print "X center:", x_center
print "Y center:", y_center
def main(args):
parser = argparse.ArgumentParser(description="Do something.")
parser.add_argument("-x", "--xcenter", type=float, default= 2, required=False)
parser.add_argument("-y", "--ycenter", type=float, default= 4, required=False)
args = parser.parse_args(args)
x(args.xcenter, args.ycenter)
if __name__ == '__main__':
main(sys.argv[1:])
Assuming you named this mytest.py
To run it you can either do any of these from the command line
python ./mytest.py -x 8
python ./mytest.py -x 8 -y 2
python ./mytest.py
which returns respectively
X center: 8.0
Y center: 4
or
X center: 8.0
Y center: 2.0
or
X center: 2
Y center: 4
Or if you want to run from another python script you can do
import mytest
mytest.main(["-x","7","-y","6"])
which returns
X center: 7.0
Y center: 6.0
The answer I was searching for was answered here: How to use python argparse with args other than sys.argv?
If main.py and parse_args() is written in this way, then the parsing can be done nicely
# main.py
import argparse
def parse_args():
parser = argparse.ArgumentParser(description="")
parser.add_argument('--input', default='my_input.txt')
return parser
def main(args):
print(args.input)
if __name__ == "__main__":
parser = parse_args()
args = parser.parse_args()
main(args)
Then you can call main() and parse arguments with parser.parse_args(['--input', 'foobar.txt']) to it in another python script:
# temp.py
from main import main, parse_args
parser = parse_args()
args = parser.parse_args([]) # note the square bracket
# to overwrite default, use parser.parse_args(['--input', 'foobar.txt'])
print(args) # Namespace(input='my_input.txt')
main(args)
I hit this problem and I couldn’t call a files Main() method because it was decorated with these click options, eg:
# @click.command()
# @click.option('--username', '-u', help="Username to use for authentication.")
When I removed these decorations/attributes I could call the Main() method successfully from another file.
from PyFileNameInSameDirectory import main as task
task()
In Python I have a module myModule.py where I define a few functions and a main(), which takes a few command line arguments.
I usually call this main() from a bash script. Now, I would like to put everything into a small package, so I thought that maybe I could turn my simple bash script into a Python script and put it in the package.
So, how do I actually call the main() function of myModule.py from the main() function of MyFormerBashScript.py? Can I even do that? How do I pass any arguments to it?
It’s just a function. Import it and call it:
import myModule
myModule.main()
If you need to parse arguments, you have two options:
-
Parse them in
main(), but pass insys.argvas a parameter (all code below in the same modulemyModule):def main(args): # parse arguments using optparse or argparse or what have you if __name__ == '__main__': import sys main(sys.argv[1:])Now you can import and call
myModule.main(['arg1', 'arg2', 'arg3'])from other another module. -
Have
main()accept parameters that are already parsed (again all code in themyModulemodule):def main(foo, bar, baz='spam'): # run with already parsed arguments if __name__ == '__main__': import sys # parse sys.argv[1:] using optparse or argparse or what have you main(foovalue, barvalue, **dictofoptions)and import and call
myModule.main(foovalue, barvalue, baz='ham')elsewhere and passing in python arguments as needed.
The trick here is to detect when your module is being used as a script; when you run a python file as the main script (python filename.py) no import statement is being used, so python calls that module "__main__". But if that same filename.py code is treated as a module (import filename), then python uses that as the module name instead. In both cases the variable __name__ is set, and testing against that tells you how your code was run.
It depends. If the main code is protected by an if as in:
if __name__ == '__main__':
...main code...
then no, you can’t make Python execute that because you can’t influence the automatic variable __name__.
But when all the code is in a function, then might be able to. Try
import myModule
myModule.main()
This works even when the module protects itself with a __all__.
from myModule import * might not make main visible to you, so you really need to import the module itself.
Assuming you are trying to pass the command line arguments as well.
import sys
import myModule
def main():
# this will just pass all of the system arguments as is
myModule.main(*sys.argv)
# all the argv but the script name
myModule.main(*sys.argv[1:])
I had the same need using argparse too.
The thing is parse_args function of an argparse.ArgumentParser object instance implicitly takes its arguments by default from sys.args. The work around, following Martijn line, consists of making that explicit, so you can change the arguments you pass to parse_args as desire.
def main(args):
# some stuff
parser = argparse.ArgumentParser()
# some other stuff
parsed_args = parser.parse_args(args)
# more stuff with the args
if __name__ == '__main__':
import sys
main(sys.argv[1:])
The key point is passing args to parse_args function.
Later, to use the main, you just do as Martijn tell.
Martijen’s answer makes sense, but it was missing something crucial that may seem obvious to others but was hard for me to figure out.
In the version where you use argparse, you need to have this line in the main body.
args = parser.parse_args(args)
Normally when you are using argparse just in a script you just write
args = parser.parse_args()
and parse_args find the arguments from the command line. But in this case the main function does not have access to the command line arguments, so you have to tell argparse what the arguments are.
Here is an example
import argparse
import sys
def x(x_center, y_center):
print "X center:", x_center
print "Y center:", y_center
def main(args):
parser = argparse.ArgumentParser(description="Do something.")
parser.add_argument("-x", "--xcenter", type=float, default= 2, required=False)
parser.add_argument("-y", "--ycenter", type=float, default= 4, required=False)
args = parser.parse_args(args)
x(args.xcenter, args.ycenter)
if __name__ == '__main__':
main(sys.argv[1:])
Assuming you named this mytest.py
To run it you can either do any of these from the command line
python ./mytest.py -x 8
python ./mytest.py -x 8 -y 2
python ./mytest.py
which returns respectively
X center: 8.0
Y center: 4
or
X center: 8.0
Y center: 2.0
or
X center: 2
Y center: 4
Or if you want to run from another python script you can do
import mytest
mytest.main(["-x","7","-y","6"])
which returns
X center: 7.0
Y center: 6.0
The answer I was searching for was answered here: How to use python argparse with args other than sys.argv?
If main.py and parse_args() is written in this way, then the parsing can be done nicely
# main.py
import argparse
def parse_args():
parser = argparse.ArgumentParser(description="")
parser.add_argument('--input', default='my_input.txt')
return parser
def main(args):
print(args.input)
if __name__ == "__main__":
parser = parse_args()
args = parser.parse_args()
main(args)
Then you can call main() and parse arguments with parser.parse_args(['--input', 'foobar.txt']) to it in another python script:
# temp.py
from main import main, parse_args
parser = parse_args()
args = parser.parse_args([]) # note the square bracket
# to overwrite default, use parser.parse_args(['--input', 'foobar.txt'])
print(args) # Namespace(input='my_input.txt')
main(args)
I hit this problem and I couldn’t call a files Main() method because it was decorated with these click options, eg:
# @click.command()
# @click.option('--username', '-u', help="Username to use for authentication.")
When I removed these decorations/attributes I could call the Main() method successfully from another file.
from PyFileNameInSameDirectory import main as task
task()