How do I forward-declare a function to avoid `NameError`s for functions defined later?

“just reorganize my code so that I don’t have this problem.” Correct. Easy to do. Always works.

You can always provide the function prior to it’s reference.

“However, there are cases when this is probably unavoidable, for instance when implementing some forms of recursion”

Can’t see how that’s even remotely possible. Please provide an example of a place where you cannot define the function prior to it’s use.

If you kick-start your script through the following:

if __name__=="__main__":
   main()

then you probably do not have to worry about things like “forward declaration”. You see, the interpreter would go loading up all your functions and then start your main() function. Of course, make sure you have all the imports correct too 😉

Come to think of it, I’ve never heard such a thing as “forward declaration” in python… but then again, I might be wrong 😉

Wrap the invocation into a function of its own so that

foo()

def foo():
    print "Hi!"

will break, but

def bar():
    foo()

def foo():
    print "Hi!"

bar()

will work properly.

The general rule in Python is that a function should be defined before its usage, which does not necessarily mean it needs to be higher in the code.

No, I don’t believe there is any way to forward-declare a function in Python.

Imagine you are the Python interpreter. When you get to the line

print "n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])

either you know what cmp_configs is or you don’t. In order to proceed, you have to
know cmp_configs. It doesn’t matter if there is recursion.

If the call to cmp_configs is inside its own function definition, you should be fine. I’ll give an example.

def a():
  b()  # b() hasn't been defined yet, but that's fine because at this point, we're not
       # actually calling it. We're just defining what should happen when a() is called.

a()  # This call fails, because b() hasn't been defined yet, 
     # and thus trying to run a() fails.

def b():
  print "hi"

a()  # This call succeeds because everything has been defined.

In general, putting your code inside functions (such as main()) will resolve your problem; just call main() at the end of the file.

There is no such thing in python like forward declaration. You just have to make sure that your function is declared before it is needed.
Note that the body of a function isn’t interpreted until the function is executed.

Consider the following example:

def a():
   b() # won't be resolved until a is invoked.

def b(): 
   print "hello"

a() # here b is already defined so this line won't fail.

You can think that a body of a function is just another script that will be interpreted once you call the function.

Now wait a minute. When your module reaches the print statement in your example, before cmp_configs has been defined, what exactly is it that you expect it to do?

If your posting of a question using print is really trying to represent something like this:

fn = lambda mylist:"n".join([str(bla)
                         for bla in sorted(mylist, cmp = cmp_configs)])

then there is no requirement to define cmp_configs before executing this statement, just define it later in the code and all will be well.

Now if you are trying to reference cmp_configs as a default value of an argument to the lambda, then this is a different story:

fn = lambda mylist,cmp_configs=cmp_configs : 
    "n".join([str(bla) for bla in sorted(mylist, cmp = cmp_configs)])

Now you need a cmp_configs variable defined before you reach this line.

[EDIT – this next part turns out not to be correct, since the default argument value will get assigned when the function is compiled, and that value will be used even if you change the value of cmp_configs later.]

Fortunately, Python being so type-accommodating as it is, does not care what you define as cmp_configs, so you could just preface with this statement:

cmp_configs = None

And the compiler will be happy. Just be sure to declare the real cmp_configs before you ever invoke fn.

You can’t forward-declare a function in Python. If you have logic executing before you’ve defined functions, you’ve probably got a problem anyways. Put your action in an if __name__ == '__main__' at the end of your script (by executing a function you name “main” if it’s non-trivial) and your code will be more modular and you’ll be able to use it as a module if you ever need to.

Also, replace that list comprehension with a generator express (i.e., print "n".join(str(bla) for bla in sorted(mylist, cmp=cmp_configs)))

Also, don’t use cmp, which is deprecated. Use key and provide a less-than function.

Sometimes an algorithm is easiest to understand top-down, starting with the overall structure and drilling down into the details.

You can do so without forward declarations:

def main():
  make_omelet()
  eat()

def make_omelet():
  break_eggs()
  whisk()
  fry()

def break_eggs():
  for egg in carton:
    break(egg)

# ...

main()

One way is to create a handler function. Define the handler early on, and put the handler below all the methods you need to call.

Then when you invoke the handler method to call your functions, they will always be available.

The handler could take an argument nameOfMethodToCall. Then uses a bunch of if statements to call the right method.

This would solve your issue.

def foo():
    print("foo")
    #take input
    nextAction=input('What would you like to do next?:')
    return nextAction

def bar():
    print("bar")
    nextAction=input('What would you like to do next?:')
    return nextAction

def handler(action):
    if(action=="foo"):
        nextAction = foo()
    elif(action=="bar"):
        nextAction = bar()
    else:
        print("You entered invalid input, defaulting to bar")
        nextAction = "bar"
    return nextAction

nextAction=input('What would you like to do next?:')

while 1:
    nextAction = handler(nextAction)

I apologize for reviving this thread, but there was a strategy not discussed here which may be applicable.

Using reflection it is possible to do something akin to forward declaration. For instance lets say you have a section of code that looks like this:

# We want to call a function called 'foo', but it hasn't been defined yet.
function_name = 'foo'
# Calling at this point would produce an error

# Here is the definition
def foo():
    bar()

# Note that at this point the function is defined
    # Time for some reflection...
globals()[function_name]()

So in this way we have determined what function we want to call before it is actually defined, effectively a forward declaration. In python the statement globals()[function_name]() is the same as foo() if function_name = 'foo' for the reasons discussed above, since python must lookup each function before calling it. If one were to use the timeit module to see how these two statements compare, they have the exact same computational cost.

Of course the example here is very useless, but if one were to have a complex structure which needed to execute a function, but must be declared before (or structurally it makes little sense to have it afterwards), one can just store a string and try to call the function later.

Import the file itself. Assuming the file is called test.py:

import test

if __name__=='__main__':
    test.func()
else:
    def func():
        print('Func worked')

# declare a fake function (prototype) with no body
def foo(): pass

def bar():
    # use the prototype however you see fit
    print(foo(), "world!")

# define the actual function (overwriting the prototype)
def foo():
    return "Hello,"

bar()

Output:

Hello, world!

TL;DR: Python does not need forward declarations. Simply put your function calls inside function def definitions, and you’ll be fine.

def foo(count):
    print("foo "+str(count))
    if(count>0):
        bar(count-1)

def bar(count):
    print("bar "+str(count))
    if(count>0):
        foo(count-1)

foo(3)
print("Finished.")

recursive function definitions, perfectly successfully gives:

foo 3
bar 2
foo 1
bar 0
Finished.

However,

bug(13)

def bug(count):
    print("bug never runs "+str(count))

print("Does not print this.")

breaks at the top-level invocation of a function that hasn’t been defined yet, and gives:

Traceback (most recent call last):
  File "./test1.py", line 1, in <module>
    bug(13)
NameError: name 'bug' is not defined

Python is an interpreted language, like Lisp. It has no type checking, only run-time function invocations, which succeed if the function name has been bound and fail if it’s unbound.

Critically, a function def definition does not execute any of the funcalls inside its lines, it simply declares what the function body is going to consist of. Again, it doesn’t even do type checking. So we can do this:

def uncalled():
    wild_eyed_undefined_function()
    print("I'm not invoked!")

print("Only run this one line.")

and it runs perfectly fine (!), with output

Only run this one line.

The key is the difference between definitions and invocations.

The interpreter executes everything that comes in at the top level, which means it tries to invoke it. If it’s not inside a definition.
Your code is running into trouble because you attempted to invoke a function, at the top level in this case, before it was bound.

The solution is to put your non-top-level function invocations inside a function definition, then call that function sometime much later.

The business about "if __ main __" is an idiom based on this principle, but you have to understand why, instead of simply blindly following it.

There are certainly much more advanced topics concerning lambda functions and rebinding function names dynamically, but these are not what the OP was asking for. In addition, they can be solved using these same principles: (1) defs define a function, they do not invoke their lines; (2) you get in trouble when you invoke a function symbol that’s unbound.

Python does not support forward declarations, but common workaround for this is use of the the following condition at the end of your script/code:

if __name__ == '__main__': main()

With this it will read entire file first and then evaluate condition and call main() function which will be able to call any forward declared function as it already read the entire file first. This condition leverages special variable __name__ which returns __main__ value whenever we run Python code from current file (when code was imported as a module, then __name__ returns module name).

Python technically has support for forward declaration.

if you define a function/class then set the body to pass, it will have an empty entry in the global table.

you can then "redefine" the function/class later on to implement the function/class.

unlike c/c++ forward declaration though, this does not work from outside the scope (i.e. another file) as they have their own "global" namespace

example:

def foo(): pass

foo()

def foo(): print("FOOOOO")

foo()

foo is declared both times
however the first time foo is called it does not do anything as the body is just pass
but the second time foo is called. it executes the new body of print("FOOOOO")

but again. note that this does not fix circular dependancies. this is because files have their own name and have their own definitions of functions

example 2:

class bar: pass

print(bar)

this prints <class '__main__.bar'> but if it was declared in another file it would be <class 'otherfile.foo'>

i know this post is old, but i though that this answer would be useful to anyone who keeps finding this post after the many years it has been posted for