Trouble installing private github repository using pip
Question:
To preface, I have already seen this question Is it possible to use pip to install a package from a private github repository?
I am trying to install a package from a private repository that I have access to using pip.
I am able to directly clone it like so:
(myenv)robbie@ubuntu:~/git$ git clone [email protected]:matherbk/django-messages.git
Cloning into 'django-messages'...
remote: Counting objects: 913, done.
remote: Compressing objects: 100% (345/345), done.
remote: Total 913 (delta 504), reused 913 (delta 504)
Receiving objects: 100% (913/913), 165.73 KiB, done.
Resolving deltas: 100% (504/504), done.
But when I try to install it via pip (my virtualenv is activated):
(myenv)robbie@ubuntu:~/git$ pip install git+https://[email protected]/matherbk/django-messages.gitDownloading/unpacking git+https://[email protected]/matherbk/django-messages.git
Cloning https://[email protected]/matherbk/django-messages.git to /tmp/pip-13ushS-build
Password for 'https://[email protected]':
fatal: Authentication failed
Complete output from command /usr/bin/git clone -q https://[email protected]/matherbk/django-messages.git /tmp/pip-13ushS-build:
----------------------------------------
Command /usr/bin/git clone -q https://[email protected]/matherbk/django-messages.git /tmp/pip-13ushS-build failed with error code 128 in None
Storing complete log in /home/robbie/.pip/pip.log
I tried typing in my password but it failed. However I am ssh authenticated for [email protected]:
(myenv)robbie@ubuntu:~/git$ ssh -T [email protected]
Hi robpodosek! You've successfully authenticated, but GitHub does not provide shell access.
I can switch [email protected] to [email protected] and it lets me install via pip just fine:
(myenv)robbie@ubuntu:~/git$ pip install git+https://[email protected]/matherbk/django-messages.git
Downloading/unpacking git+https://[email protected]/matherbk/django-messages.git
Cloning https://[email protected]/matherbk/django-messages.git to /tmp/pip-SqEan9-build
Password for 'https://[email protected]':
Running setup.py egg_info for package from git+https://[email protected]/matherbk/django-messages.git
warning: no files found matching 'README'
Installing collected packages: django-messages
Running setup.py install for django-messages
warning: no files found matching 'README'
Successfully installed django-messages
Cleaning up...
However I want to do what the first mentioned article does by using [email protected] so that I don’t have to add my username into a requirements.txt file and add that to version control.
Any thoughts? I previously had this working but had to boot up a fresh image. Thanks ahead of time.
Answers:
It worked by using oxyum’s suggestion of changing the : to a /:
pip install git+ssh://[email protected]/matherbk/django-messages.git
Make sure you use github.com/account instead of github.com:account
see Git+SSH dependencies have subtle (yet critical) differences from git clone
Had virtualenv activated and had to install a series of applications from github.com from a text file.
(venv)$ cat requirements.txt
-e git://github.com/boto/botocore.git@develop#egg=botocore
-e git://github.com/boto/jmespath.git@develop#egg=jmespath
-e git://github.com/boto/s3transfer.git@develop#egg=s3transfer
nose==1.3.3
mock==1.3.0
wheel==0.24.0
unittest2==0.5.1; python_version == '2.6'
(venv)$ pip install -r requirements.txt
Ignoring unittest2: markers 'python_version == "2.6"' don't match your environment Obtaining botocore from git+git://github.com/boto/botocore.git@develop#egg=botocore (from -r requirements.txt (line 1))
Cloning git://github.com/boto/botocore.git (to develop) to ./venv/src/botocore
fatal: unable to connect to github.com:
github.com[0: 192.30.253.112]: errno=Connection timed out
github.com[1: 192.30.253.113]: errno=Connection timed out
Command "git clone -q git://github.com/boto/botocore.git
/home/ubuntu/utils/boto3/venv/src/botocore" failed with error code 128 in None
However, as @Robeezy suggested, edited the requirement.txt and changed from
-e git://github.com...
to
-e git+https://github.com...
That is the link provided if you were to clone from the site (only options were Clone or Download).
So, thank you! It did work finally.
If you’re installing with pip install git+https://github.com/repo and getting this error, make sure your username and password are correct. I was getting this error because I was incorrectly entering my password.
To preface, I have already seen this question Is it possible to use pip to install a package from a private github repository?
I am trying to install a package from a private repository that I have access to using pip.
I am able to directly clone it like so:
(myenv)robbie@ubuntu:~/git$ git clone [email protected]:matherbk/django-messages.git
Cloning into 'django-messages'...
remote: Counting objects: 913, done.
remote: Compressing objects: 100% (345/345), done.
remote: Total 913 (delta 504), reused 913 (delta 504)
Receiving objects: 100% (913/913), 165.73 KiB, done.
Resolving deltas: 100% (504/504), done.
But when I try to install it via pip (my virtualenv is activated):
(myenv)robbie@ubuntu:~/git$ pip install git+https://[email protected]/matherbk/django-messages.gitDownloading/unpacking git+https://[email protected]/matherbk/django-messages.git
Cloning https://[email protected]/matherbk/django-messages.git to /tmp/pip-13ushS-build
Password for 'https://[email protected]':
fatal: Authentication failed
Complete output from command /usr/bin/git clone -q https://[email protected]/matherbk/django-messages.git /tmp/pip-13ushS-build:
----------------------------------------
Command /usr/bin/git clone -q https://[email protected]/matherbk/django-messages.git /tmp/pip-13ushS-build failed with error code 128 in None
Storing complete log in /home/robbie/.pip/pip.log
I tried typing in my password but it failed. However I am ssh authenticated for [email protected]:
(myenv)robbie@ubuntu:~/git$ ssh -T [email protected]
Hi robpodosek! You've successfully authenticated, but GitHub does not provide shell access.
I can switch [email protected] to [email protected] and it lets me install via pip just fine:
(myenv)robbie@ubuntu:~/git$ pip install git+https://[email protected]/matherbk/django-messages.git
Downloading/unpacking git+https://[email protected]/matherbk/django-messages.git
Cloning https://[email protected]/matherbk/django-messages.git to /tmp/pip-SqEan9-build
Password for 'https://[email protected]':
Running setup.py egg_info for package from git+https://[email protected]/matherbk/django-messages.git
warning: no files found matching 'README'
Installing collected packages: django-messages
Running setup.py install for django-messages
warning: no files found matching 'README'
Successfully installed django-messages
Cleaning up...
However I want to do what the first mentioned article does by using [email protected] so that I don’t have to add my username into a requirements.txt file and add that to version control.
Any thoughts? I previously had this working but had to boot up a fresh image. Thanks ahead of time.
It worked by using oxyum’s suggestion of changing the : to a /:
pip install git+ssh://[email protected]/matherbk/django-messages.git
Make sure you use github.com/account instead of github.com:account
see Git+SSH dependencies have subtle (yet critical) differences from git clone
Had virtualenv activated and had to install a series of applications from github.com from a text file.
(venv)$ cat requirements.txt
-e git://github.com/boto/botocore.git@develop#egg=botocore
-e git://github.com/boto/jmespath.git@develop#egg=jmespath
-e git://github.com/boto/s3transfer.git@develop#egg=s3transfer
nose==1.3.3
mock==1.3.0
wheel==0.24.0
unittest2==0.5.1; python_version == '2.6'
(venv)$ pip install -r requirements.txt
Ignoring unittest2: markers 'python_version == "2.6"' don't match your environment Obtaining botocore from git+git://github.com/boto/botocore.git@develop#egg=botocore (from -r requirements.txt (line 1))
Cloning git://github.com/boto/botocore.git (to develop) to ./venv/src/botocore
fatal: unable to connect to github.com:
github.com[0: 192.30.253.112]: errno=Connection timed out
github.com[1: 192.30.253.113]: errno=Connection timed out
Command "git clone -q git://github.com/boto/botocore.git
/home/ubuntu/utils/boto3/venv/src/botocore" failed with error code 128 in None
However, as @Robeezy suggested, edited the requirement.txt and changed from
-e git://github.com...
to
-e git+https://github.com...
That is the link provided if you were to clone from the site (only options were Clone or Download).
So, thank you! It did work finally.
If you’re installing with pip install git+https://github.com/repo and getting this error, make sure your username and password are correct. I was getting this error because I was incorrectly entering my password.