Python can't find module in the same folder
Question:
My python somehow can’t find any modules in the same directory.
What am I doing wrong? (python2.7)
So I have one directory ‘2014_07_13_test’, with two files in it:
- test.py
- hello.py
where hello.py:
# !/usr/local/bin/python
# -*- coding: utf-8 -*-
def hello1():
print 'HelloWorld!'
and test.py:
# !/usr/local/bin/python
# -*- coding: utf-8 -*-
from hello import hello1
hello1()
Still python gives me
>>> Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "<string>", line 4, in <module>
ImportError: No module named hello
What’s wrong?
Answers:
Your code is fine, I suspect your problem is how you are launching it.
You need to launch python from your ‘2014_07_13_test’ directory.
Open up a command prompt and ‘cd’ into your ‘2014_07_13_test’ directory.
For instance:
$ cd /path/to/2014_07_13_test
$ python test.py
If you cannot ‘cd’ into the directory like this you can add it to sys.path
In test.py:
import sys, os
sys.path.append('/path/to/2014_07_13_test')
Or set/edit the PYTHONPATH
And all should be well…
…well there is a slight mistake with your ‘shebang’ lines (the first line in both your files), there shouldn’t be a space between the ‘#’ and the ‘!’
There is a better shebang you should use.
Also you don’t need the shebang line on every file… only the ones you intend to run from your shell as executable files.
Change your import in test.py to:
from .hello import hello1
I had a similar problem, I solved it by explicitly adding the file’s directory to the path list:
import os
import sys
file_dir = os.path.dirname(__file__)
sys.path.append(file_dir)
After that, I had no problem importing from the same directory.
Here is the generic solution I use. It solves the problem for importing from modules in the same folder:
import os.path
import sys
sys.path.append(os.path.join(os.path.dirname(__file__), '..'))
Put this at top of the module which gives the error “No module named xxxx”
In my case, Python was unable to find it because I’d put the code inside a module with hyphens, e.g. my-module. When I changed it to my_module it worked.
I ran into this issue. I had three folders in the same directory so I had to specify which folder.
Ex: from Folder import script
The following doesn’t solve the OP’s problem, but the title and error is exactly what I faced.
If your project has a setup.py script in it, you can install that package you are in, with python3 -m pip install -e . or python3 setup.py install or python3 setup.py develop, and this package will be installed, but still editable (so changes to the code will be seen when importing the package). If it doesn’t have a setup.py, make sense of it.
Anyway, the problem OP faces seems to not exist anymore?
file one.py:
def function():
print("output")
file two.py:
#!/usr/bin/env python3
import one
one.function()
chmod +x two.py # To allow execution of the python file
./two.py # Only works if you have a python shebang
Command line output: output
Other solutions seem ‘dirty’
In the case of OP with 2 test files, modifying them to work is probably fine. However, in other real scenarios, the methods listed in the other answers is probably not recommended. They require you to modify the python code or restrict your flexibility (running the python file from a specific directory) and generally introduce annoyances. What if you’ve just cloned a project, and this happens? It probably already works for other people, and making code changes is unnecessary. The chosen answer also wants people to run a script from a specific folder to make it work. This can be a source of long term annoyance, which is never good. It also suggests adding your specific python folder to PATH (can be done through python or command line). Again, what happens if you rename or move the folder in a few months? You have to hunt down this page again, and eventually discover you need to set the path (and that you did exactly this a few months ago), and that you simply need to update a path (sure you could use sys.path and programmatically set it, but this can be flaky still). Many sources of great annoyance.
If you are sure that all the modules, files you’re trying to import are in the same folder and they should be picked directly just by giving the name and not the reference path then your editor or terminal should have opened the main folder where all the files/modules are present.
Either, try running from Terminal, make sure first you go to the correct directory.
cd path to the root folder where all the modules are
python script.py
Or if running [F5] from the editor i.e VsCode then open the complete folder there and not the individual files.
I had somewhat of a similar problem. I could not import modules even though they all were in the same directory (importError). I tried out the solutions above but none of them worked for me. I had to set up the path myself (manually). Also, the code was run on my university server, perhaps that’s why I had to set the path manually.
import sys
sys.path.append(r'path_to_directory_where_all_modules_are')
I recommend reading The Module Search Path
After spending hours to get imports working like:
from business import Business
from .business import Business
import .Business
import business.Business
…
I got finally rid of my embedded python installation and installed python from the scratch by be the .exe file for all users like in
c:Program FilesPython310
then I made sure my PATH Variable is up to date with the new installation (so what we want to see or make are entries like c:Program FilesPython310 and c:Program FilesPython310Scripts and %USERPROFILE%AppDataRoamingPythonPython310Scripts) and started a cmd with administrator privileges, downloaded the get-pip.py file and run it in the elivated cmd like python get-pip.py and finaly everything worked as expected… I don’t know why or what I did wrong or so, but python really seems that it need to be integrated deeply into windows or it just do not work the easy way. It doesn’t happen too often, but in this case it worked a lot better in linux 😉
Also recheck spelling of both the file and the module for typos.
For example
import passwords
When the file name has been saved as password missing an s.
It might sound obvious but it can sometimes be something as simple as this when all other advice above not working 🙂
My python somehow can’t find any modules in the same directory.
What am I doing wrong? (python2.7)
So I have one directory ‘2014_07_13_test’, with two files in it:
- test.py
- hello.py
where hello.py:
# !/usr/local/bin/python
# -*- coding: utf-8 -*-
def hello1():
print 'HelloWorld!'
and test.py:
# !/usr/local/bin/python
# -*- coding: utf-8 -*-
from hello import hello1
hello1()
Still python gives me
>>> Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "<string>", line 4, in <module>
ImportError: No module named hello
What’s wrong?
Your code is fine, I suspect your problem is how you are launching it.
You need to launch python from your ‘2014_07_13_test’ directory.
Open up a command prompt and ‘cd’ into your ‘2014_07_13_test’ directory.
For instance:
$ cd /path/to/2014_07_13_test
$ python test.py
If you cannot ‘cd’ into the directory like this you can add it to sys.path
In test.py:
import sys, os
sys.path.append('/path/to/2014_07_13_test')
Or set/edit the PYTHONPATH
And all should be well…
…well there is a slight mistake with your ‘shebang’ lines (the first line in both your files), there shouldn’t be a space between the ‘#’ and the ‘!’
There is a better shebang you should use.
Also you don’t need the shebang line on every file… only the ones you intend to run from your shell as executable files.
Change your import in test.py to:
from .hello import hello1
I had a similar problem, I solved it by explicitly adding the file’s directory to the path list:
import os
import sys
file_dir = os.path.dirname(__file__)
sys.path.append(file_dir)
After that, I had no problem importing from the same directory.
Here is the generic solution I use. It solves the problem for importing from modules in the same folder:
import os.path
import sys
sys.path.append(os.path.join(os.path.dirname(__file__), '..'))
Put this at top of the module which gives the error “No module named xxxx”
In my case, Python was unable to find it because I’d put the code inside a module with hyphens, e.g. my-module. When I changed it to my_module it worked.
I ran into this issue. I had three folders in the same directory so I had to specify which folder.
Ex: from Folder import script
The following doesn’t solve the OP’s problem, but the title and error is exactly what I faced.
If your project has a setup.py script in it, you can install that package you are in, with python3 -m pip install -e . or python3 setup.py install or python3 setup.py develop, and this package will be installed, but still editable (so changes to the code will be seen when importing the package). If it doesn’t have a setup.py, make sense of it.
Anyway, the problem OP faces seems to not exist anymore?
file one.py:
def function():
print("output")
file two.py:
#!/usr/bin/env python3
import one
one.function()
chmod +x two.py # To allow execution of the python file
./two.py # Only works if you have a python shebang
Command line output: output
Other solutions seem ‘dirty’
In the case of OP with 2 test files, modifying them to work is probably fine. However, in other real scenarios, the methods listed in the other answers is probably not recommended. They require you to modify the python code or restrict your flexibility (running the python file from a specific directory) and generally introduce annoyances. What if you’ve just cloned a project, and this happens? It probably already works for other people, and making code changes is unnecessary. The chosen answer also wants people to run a script from a specific folder to make it work. This can be a source of long term annoyance, which is never good. It also suggests adding your specific python folder to PATH (can be done through python or command line). Again, what happens if you rename or move the folder in a few months? You have to hunt down this page again, and eventually discover you need to set the path (and that you did exactly this a few months ago), and that you simply need to update a path (sure you could use sys.path and programmatically set it, but this can be flaky still). Many sources of great annoyance.
If you are sure that all the modules, files you’re trying to import are in the same folder and they should be picked directly just by giving the name and not the reference path then your editor or terminal should have opened the main folder where all the files/modules are present.
Either, try running from Terminal, make sure first you go to the correct directory.
cd path to the root folder where all the modules are
python script.py
Or if running [F5] from the editor i.e VsCode then open the complete folder there and not the individual files.
I had somewhat of a similar problem. I could not import modules even though they all were in the same directory (importError). I tried out the solutions above but none of them worked for me. I had to set up the path myself (manually). Also, the code was run on my university server, perhaps that’s why I had to set the path manually.
import sys
sys.path.append(r'path_to_directory_where_all_modules_are')
I recommend reading The Module Search Path
After spending hours to get imports working like:
from business import Business
from .business import Business
import .Business
import business.Business
…
I got finally rid of my embedded python installation and installed python from the scratch by be the .exe file for all users like in
c:Program FilesPython310
then I made sure my PATH Variable is up to date with the new installation (so what we want to see or make are entries like c:Program FilesPython310 and c:Program FilesPython310Scripts and %USERPROFILE%AppDataRoamingPythonPython310Scripts) and started a cmd with administrator privileges, downloaded the get-pip.py file and run it in the elivated cmd like python get-pip.py and finaly everything worked as expected… I don’t know why or what I did wrong or so, but python really seems that it need to be integrated deeply into windows or it just do not work the easy way. It doesn’t happen too often, but in this case it worked a lot better in linux 😉
Also recheck spelling of both the file and the module for typos.
For example
import passwords
When the file name has been saved as password missing an s.
It might sound obvious but it can sometimes be something as simple as this when all other advice above not working 🙂